YARDBEAST 2050 277cc 9.5HP Kohler CH395 engine 3" Wood Chipper Shredder New

Yardbeast 3” wood Chipper Shredder is a residential grade wood chipper shredder with a chipping capacity up to 3” and a shredding capacity up to 5/8”. It has 2 dedicated hoppers, for chipping and shredding. Is ideal for small or medium properties.

You can comfortably tow by hand to one job to another. The centrifugal clutch provides a shock load protection that improves the engine’s operational life. The dual tool steel blades makes the chipping much easier.

• Engine For The Pro’s: Quad-Clean™ all-season four-stage cyclonic air filter – effective engine protection for tough-and-dirty conditions. Large-capacity fuel tank means more time working, less time filling. 
• Ferocious Rotor: The heart of the chipper, fabricated of thick gauge steel equipped with 4 separate arrays of our unique design FULLSHRED Flail technology, a hybrid between chopping with machete-like sharpness while busting branches like a hammer at the same time. This rotor swallow branches and leaves like no other.
• Perfect Mulch: The 2050 come standard with a 7/8″ diameter hole screen size, chewing out approx. dime-sized wood chips. 

• Samurai Blade: 2050 boasts two super sharp D2 Tool Steel Blades for improved chipping performance, taking this chipper to a professional-grade level making up to 4,600 cuts per minute.
• Wide Hoppers: Unless there is intensive pruning, branches and twigs come with many twisted sections making chipping a difficult task. At Yardbeast our chutes are always wide feed so the less pruning involved, the more efficient you will be on your job.
• 2-year residential/90 day commercial warranty make this engine a true companion to venture out in the woods.

• Chipping capacity: 3"
  
• Shredding capacity: 5/8"
  
• Rotor RPM: 2,300
  
• Rotor Weight: 32 lbs
  
• Blade: 2 - Hardened Steel treated blades
  
• Blade dimensions: 4.40" x 2.32"
  
• Rotor Construction: 1/4" thick disc with 1/4" thick rotor vanes and hammer rods
  
• Flywheel: 13.46"
  
• Feed Hopper: 6.5" x 6"
  
• Frame construction: 10-ga steel
  
• Bearing units: SKF® bearings units
  
• Discharge height: Ground floor
  
• Control: Discharge deflector
  
• Chipper Weight (w/engine): 260 lbs
• Make: Kohler CH395 277 cc engine
• RPM: 3,600
  
• Torque: 13.9ft-lbs gross torque
  
• Dry Weight: 61 Lbs
  
• Displacement: 277cc
  
• Oil Capacity: 1.4 quarts (1.3 liters)